Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

(ARP) entry and receiving a multicast data packet with no matching route. Normally, the
Packet Forwarding Engine forwards the requests to the Routing Engine.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_PFE
PFE_SCCP_ADD_PORT_FAIL
System Log Message Failed to add SCCP ALG port to application definition table
Description Failed to add the SCCP port to the application definition table.
Type Error: An error occurred
Severity error
Facility LOG_PFE
PFE_SCCP_DEL_PORT_FAIL
System Log Message Failed to remove SCCP ALG port from application definition table
Description Failed to delete the SCCP port from application definition table.
Type Error: An error occurred
Severity error
Facility LOG_PFE
PFE_SCCP_REG_NAT_VEC_FAIL
System Log Message Failed to add SCCP ALG vector to flow module
Description Failed to register the SCCP vector with the flow module.
Type Error: An error occurred
Severity error
Facility LOG_PFE
PFE_SCCP_REG_RM_FAIL
System Log Message Failed to register SCCP client to Resource Manager
Description Failed to register the SCCP Resource Manager client.
Type Error: An error occurred
Severity error
Facility LOG_PFE
Copyright © 2010, Juniper Networks, Inc.464
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English