Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description An IP version 6 (IPv6) Internet Control Message Protocol (ICMP) packet matched against
a stateless firewall filter with the indicated 'syslog' action (A = Accept, D = Discard, R =
Reject).
Type Event: This message reports an event, not an error
Severity info
Facility ANY
PFE_FW_SYSLOG_IP6_TCP_UDP
System Log Message FW: interface-name action protocol-name source-address destination-address
sport:source-port dport:destination-port (count packets)
Description An IP version 6 (IPv6) Transmission Control Protocol/User Datagram Protocol (TCP/UDP)
packet matched against a stateless firewall filter with the indicated 'syslog' action (A =
Accept, D = Discard, R = Reject).
Type Event: This message reports an event, not an error
Severity info
Facility ANY
PFE_MGCP_MEM_INIT_FAILED
System Log Message Failed to create memory pool for error-message
Description Failed to initialize the MGCP memory pool.
Type Error: An error occurred
Severity error
Facility LOG_PFE
PFE_MGCP_REG_HDL_FAIL
System Log Message Failed to register object-name handle
Description Failed to register the handler with the external module.
Type Error: An error occurred
Severity error
Facility LOG_PFE
PFE_NH_RESOLVE_THROTTLED
System Log Message Next-hop resolution requests from interface logical-interface-index throttled
Description The Packet Forwarding Engine throttled next-hop resolution requests from the indicated
interface, because the high number of requests might constitute an attempted
denial-of-service (DoS) attack. Examples of events that generate next-hop resolution
requests include an attempt to forward a packet without an Address Resolution Protocol
463Copyright © 2010, Juniper Networks, Inc.
Chapter 64: PFE System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English