Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description Before a postservice firewall is deleted, it is sanity checked against what is installed in
the forwarding topology. A mismatch was detected between the firewall to be deleted
and the forwarding topology, and the delete operation was canceled.
Type Error: An error occurred
Severity error
Facility LOG_PFE
PFE_FW_SYSLOG_ETH
System Log Message FW: interface-name action destination-address source-address protocol-name (count
packets)
Description An Ethernet frame matched against a stateless firewall filter with the indicated 'syslog'
action (A = Accept, D = Discard, R = Reject).
Type Event: This message reports an event, not an error
Severity info
Facility ANY
PFE_FW_SYSLOG_IP
System Log Message FW: interface-name action protocol-name source-address destination-address
source-port-or-type destination-port-or-code (count packets)
Description An IP packet matched against a stateless firewall filter with the indicated 'syslog' action
(A = Accept, D = Discard, R = Reject).
Type Event: This message reports an event, not an error
Severity info
Facility ANY
PFE_FW_SYSLOG_IP6_GEN
System Log Message FW: interface-name action protocol-name source-address destination-address (count
packets)
Description An IP version 6 (IPv6) packet matched against a stateless firewall filter with the indicated
'syslog' action (A = Accept, D = Discard, R = Reject).
Type Event: This message reports an event, not an error
Severity info
Facility ANY
PFE_FW_SYSLOG_IP6_ICMP
System Log Message FW: interface-name action protocol-name source-address destination-address type type
code error-code (count packets)
Copyright © 2010, Juniper Networks, Inc.462
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English