Severity error
Facility LOG_PFE
PFE_FW_IF_DIALER_ERR
System Log Message DFW: output type (firewall-name) on ifl logical-interface-index rejected, invalid interface
Description Firewalls that use the ipsec-sa action to forward traffic to an IP Security (IPSec) security
association (SA) cannot be configured on the ES Physical Interface Card (PIC) that
services the SA. That configuration creates traffic loops within the router and was probably
unintended. The problematic filter was automatically removed from the indicated
interface.
Type Error: An error occurred
Severity error
Facility LOG_PFE
PFE_FW_IF_INPUT_ERR
System Log Message DFW: input type (firewall-name) on ifl logical-interface-index rejected, invalid interface
Description Firewalls that use the ipsec-sa action to forward traffic to an IP Security (IPSec) security
association (SA) cannot be configured on the ES Physical Interface Card (PIC) that
services the SA. That configuration creates traffic loops within the router and was probably
unintended. The problematic firewall was automatically removed from the indicated
interface.
Type Error: An error occurred
Severity error
Facility LOG_PFE
PFE_FW_IF_OUTPUT_ERR
System Log Message DFW: output type (firewall-name) on ifl logical-interface-index rejected, invalid interface
Description Firewalls that use the ipsec-sa action to forward traffic to an IP Security (IPSec) security
association (SA) cannot be configured on the ES Physical Interface Card (PIC) that
services the SA. That configuration creates traffic loops within the router and was probably
unintended. The problematic firewall was automatically removed from the indicated
interface.
Type Error: An error occurred
Severity error
Facility LOG_PFE
PFE_FW_PSF_DELETE_MISMATCH_ERR
System Log Message Instance mismatch for type (installed-firewall-name != deleted-firewall-name) hardware
label index family protocol-family
461Copyright © 2010, Juniper Networks, Inc.
Chapter 64: PFE System Log Messages
To Next Page
Loading...