Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Severity info
Facility LOG_AUTH
PPPD_CHAP_REPLAY_ATTACK_DETECTED
System Log Message interface-name: received operation with CHAP ID message-id, which is identical to an
outstanding challenge. Peer is trying to exhort response value.
Description During an exchange of authentication messages, a peer responded to a challenge message
from the Point-to-Point Protocol process (pppd) by returning the same message. The
pppd process did not respond to the peer, because doing so would provide the answer
to the original challenge. The peer must provide the answer on its own for authentication
to succeed.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
PPPD_EVLIB_CREATE_FAILURE
System Log Message Unable to create event context: error-message
Description The Point-to-Point Protocol process (pppd) could not create a context for handling
asynchronous events, for the indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
PPPD_LOCAL_CREATE_FAILED
System Log Message Unable to allocate LOCAL module handle: error-message
Description The Point-to-Point Protocol process (pppd) attempted to allocate a locally configured
'password' authentication module as part of its authentication sequence. The allocation
failed.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
PPPD_MEMORY_ALLOCATION_FAILURE
System Log Message Unable to allocate memory for object object-name: error-message
Description The Point-to-Point Protocol process (pppd) could not allocate memory from the heap
for the indicated object.
Type Error: An error occurred
481Copyright © 2010, Juniper Networks, Inc.
Chapter 69: PPPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English