Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Severity error
Facility LOG_AUTH
Action Contact your technical support representative.
PPPD_PAP_GETHOSTNAME_FAILED
System Log Message Unable to obtain hostname for PAP message sent from interface interface-name:
error-message
Description The Point-to-Point Protocol process (pppd) could not obtain the hostname it needed
to fill in the 'Name' field in an outgoing Password Authentication Protocol (PAP) packet
sent from the indicated interface.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
PPPD_PAP_INVALID_IDENTIFIER
System Log Message Interface interface-name received 'operation' message with PAP ID message-id instead
of expected ID expected-value
Description The Point-to-Point Protocol process (pppd) received a Password Authentication Protocol
(PAP) message from a peer that included the indicated identifier, which did not match
the indicated expected value.
Type Error: An error occurred
Severity info
Facility LOG_AUTH
PPPD_PAP_INVALID_OPCODE
System Log Message Interface interface-name received 'operation' message with PAP ID message-id and invalid
operation code operation-code
Description The Point-to-Point Protocol process (pppd) received a Password Authentication Protocol
(PAP) message from a peer that included the indicated operation code, which is invalid.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
PPPD_PAP_LOCAL_PASSWORD_UNAVAIL
System Log Message Unable to determine value for 'Password' in outgoing PAP packet
Description The Point-to-Point Protocol process (pppd) could not determine the value to write in
the 'Password' field in an outgoing Password Authentication Protocol (PAP) packet.
Copyright © 2010, Juniper Networks, Inc.482
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English