Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Type Error: An error occurred
Severity error
Facility LOG_AUTH
Cause The local password was not defined for the local hostname.
PPPD_PAP_OPERATION_UNEXPECTED
System Log Message interface-name: unexpected operation type operation (PAP ID message-id)
Description The Point-to-Point Protocol process (pppd) received a Password Authentication Protocol
(PAP) message with the indicated identifier and operation type. The operation type was
not valid.
Type Error: An error occurred
Severity info
Facility LOG_AUTH
PPPD_POOL_ADDRESSES_EXHAUSTED
System Log Message No addresses available in pool "pool-name" to assign to remote peer on interface
interface-name
Description The Point-to-Point Protocol process (pppd) could not assign an address from the
indicated address pool to the remote peer on the indicated interface, because there were
no more addresses available in the pool.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Action Increase the number of addresses in the address pool.
PPPD_RADIUS_ADD_SERVER_FAILED
System Log Message Unable to add RADIUS server radius-server for profile access-profile: error-message
Description The Point-to-Point Protocol process (pppd) could not add the indicated RADIUS server
for the indicated access profile.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
PPPD_RADIUS_ALLOC_PASSWD_FAILED
System Log Message Unable to allocate RADIUS password of size size: error-message
483Copyright © 2010, Juniper Networks, Inc.
Chapter 69: PPPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English