Description The Point-to-Point Protocol process (pppd) could not allocate space for a temporary
Challenge Handshake Authentication Protocol (CHAP) RADIUS password of the indicated
size.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
PPPD_RADIUS_CREATE_FAILED
System Log Message Unable to allocate RADIUS module handle: error-message
Description The Point-to-Point Protocol process (pppd) attempted to allocate a RADIUS
authentication module as part of its authentication sequence. The allocation failed.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
PPPD_RADIUS_CREATE_REQ_FAILED
System Log Message Unable to create RADIUS access request message: error-message
Description The Point-to-Point Protocol process (pppd) could not create an access request message
to send to the RADIUS server.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
PPPD_RADIUS_GETHOSTNAME_FAILED
System Log Message Unable to obtain hostname for outgoing RADIUS message: error-message
Description The Point-to-Point Protocol process (pppd) could not obtain the hostname it needed
to fill in the PPP_IDENTIFIER field in an outgoing RADIUS message.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
PPPD_RADIUS_MESSAGE_UNEXPECTED
System Log Message Unknown response from RADIUS server: return-value
Description The RADIUS authentication module for the Point-to-Point Protocol process (pppd)
received a message from the RADIUS server that it could not process.
Type Error: An error occurred
Copyright © 2010, Juniper Networks, Inc.484
Junos 10.3 System Log Messages Reference
To Next Page
Loading...