by either its numerical index or its name. The SNMP remote operations process (rmopd)
could not find any information about the interface with the indicated index.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RMOPD_IFNAME_NOT_ACTIVE
System Log Message ifname: interface-name
Description When a Simple Network Management Protocol (SNMP) client requests a remote
operation, it can specify which interface to use as the source host address, identifying it
by either its numerical index or its name. The indicated name was invalid because it
represents an inactive interface.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RMOPD_IFNAME_NO_INFO
System Log Message No information for interface-name, message: error-message
Description When a Simple Network Management Protocol (SNMP) client requests a remote
operation, it can specify which interface to use as the source host address, identifying it
by either its numerical index or its name. The SNMP remote operations process (rmopd)
could not find any information about the interface with the indicated name.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RMOPD_ROUTING_INSTANCE_NO_INFO
System Log Message No information for routing instance routing-instance: error-message
Description The indicated routing instance does not exist, so the Simple Network Management
Protocol (SNMP) remote operations process (rmopd) could not retrieve information
about it.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RMOPD_TRACEROUTE_ERROR
System Log Message Message: error-message
495Copyright © 2010, Juniper Networks, Inc.
Chapter 72: RMOPD System Log Messages