Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
RPD_AMT_CFG_ADDR_FMLY_INVALID
System Log Message Valid address family information is required
Description An invalid address family value was encountered while parsing AMT configuration.
Type Event: This message reports an event, not an error
Severity warning
Facility ANY
Action Modify the configuration statement to use a valid value.
RPD_AMT_CFG_ANYCAST_INVALID
System Log Message An invalid anycast-prefix is configured
Description An invalid anycast prefix was encountered while parsing AMT configuration.
Type Event: This message reports an event, not an error
Severity warning
Facility ANY
Action Modify the configuration statement to use a valid value.
RPD_AMT_CFG_ANYCAST_MCAST
System Log Message Anycast-prefix route-prefix cannot be a multicast address
Description A multicast address cannot be configured as the anycast-prefix
Type Event: This message reports an event, not an error
Severity warning
Facility ANY
Action Modify the configuration statement to use a valid value.
RPD_AMT_CFG_LOC_ADDR_INVALID
System Log Message An invalid local-address is configured
Description An invalid local address was encountered while parsing AMT configuration.
Type Event: This message reports an event, not an error
Severity warning
Copyright © 2010, Juniper Networks, Inc.498
Junos 10.3 System Log Messages Reference
To Next Page
Loading...