Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Severity error
Facility LOG_DAEMON
RPD_DYN_CFG_REQUEST_ACK_FAILED
System Log Message Failed to ack request data-id: error-code
Description The routing protocol process (rpd) tried to acknowledge a dynamic configuration request
and failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_DYN_CFG_RESPONSE_SLOW
System Log Message Dynamic config response for session id client-session-id took system-seconds seconds
Description The routing protocol process (rpd) is responding slowly to dynamic config requests.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
RPD_DYN_CFG_SCHEMA_OPEN_FAILED
System Log Message Could not open configuration schema: error-message
Description The routing protocol process (rpd) tried to open the configuration schema and failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_DYN_CFG_SDB_CLOSE_FAILED
System Log Message Failed to close session database: error-code
Description The routing protocol process (rpd) tried to close the session database and failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_DYN_CFG_SDB_OPEN_FAILED
System Log Message Failed to open session database: error-code
505Copyright © 2010, Juniper Networks, Inc.
Chapter 73: RPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English