Description The routing protocol process (rpd) tried to open the session database and failed.
Type Error: An error occurred
Severity info
Facility LOG_DAEMON
RPD_DYN_CFG_SES_RECOVERY_FAILED
System Log Message Recovery of session client-session-id failed
Description The routing protcol process (rpd) tried to recover a session and failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
RPD_DYN_CFG_SET_CONTEXT_FAILED
System Log Message Set dynamic config context for profile profile-name session client-session-id failed
Description The routing protocol process (rpd) tried to set up the dynamic configuration context and
failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_ESIS_ADJDOWN
System Log Message ES-IS lost adjacency-type adjacency to neighbor-nsap-netn on interface-name, reason:
reason
Description An ES-IS adjacency with the indicated neighboring router was terminated. The local
router no longer exchanges routing information with, or directs traffic to, the neighboring
router.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
Cause The communication path to the neighboring router was disrupted, a protocol error
occurred, or the neighboring router was powered down.
RPD_ESIS_ADJUP
System Log Message ES-IS new adjacency-type adjacency to neighbor-nsap-netn on interface-name
Copyright © 2010, Juniper Networks, Inc.506
Junos 10.3 System Log Messages Reference
To Next Page
Loading...