Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_LMP_NO_CALLBACK
System Log Message No function callback for label removed event
Description The routing protocol process (rpd) could not notify a client that a label was removed,
because there was no function callback for the removal event.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_LMP_NO_MEMORY
System Log Message function-name: malloc() failed (error-message, errno error-code)
Description The routing protocol process (rpd) could not allocate memory.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
RPD_LMP_NO_PEER
System Log Message Peer peer-id not found for TE link link-name (index link-id)
Description The routing protocol process (rpd) could not locate the indicated peer while processing
a TE LINK message for the traffic-engineering link with the indicated name and index.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_LMP_PEER
System Log Message operation operation failed: peer peer-name (index peer-id) reason
Description The routing protocol process (rpd) could not perform the indicated operation for the
peer with the indicated name and index, for the indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Copyright © 2010, Juniper Networks, Inc.526
Junos 10.3 System Log Messages Reference