RPD_LMP_PEER_IFL
System Log Message operation operation failed because reason for peer peer-name (index peer-id):
error-message (errno error-code)
Description The routing protocol process (rpd) could not perform the indicated operation for the
peer with the indicated name and index, for the indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_LMP_PEER_INDEX
System Log Message No more peer indexes
Description No more peer indexes were available for allocation.
Type Event: This message reports an event, not an error
Severity error
Facility LOG_DAEMON
RPD_LMP_RESOURCE
System Log Message operation operation failed: resource resource (type type, index index) reason
Description The routing protocol process (rpd) could not perform the indicated operation for the
resource with the indicated name, type, and index, for the indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_LMP_RESOURCE_NO_LINK
System Log Message TE link link-id not found for resource resource (type type, index index)
Description The routing protocol process (rpd) could not locate the indicated traffic-engineering link
for the resource with the indicated name, type, and index.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_LMP_SEND
System Log Message function-name: handling write exception (error-message, errno error-code)
Description The routing protocol process (rpd) could not send a message to the Label Management
Protocol (LMP) process (lmpd).
527Copyright © 2010, Juniper Networks, Inc.
Chapter 73: RPD System Log Messages