Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_LMP_SEND_ALLOCATION_MESSAGE
System Log Message Unable to send allocation message: error-message (error-code)
Description The routing protocol process (rpd) could not send an allocation message.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_LMP_SYSFAIL
System Log Message Unable to start type timer
Description The routing protocol process (rpd) discovered that the Label Management Protocol
(LMP) process (lmpd) was not running. The rpd process attempted to start the indicated
type of timer for restarting the lmpd process or reestablishing a connection to it, but the
attempt failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause An internal software failure occurred.
Action Examine the messages that immediately follow this message in the system log for
information about possible reasons that lmpd failed.
RPD_LMP_TE_LINK
System Log Message operation operation failed: TE link link-name (index index) reason
Description The routing protocol process (rpd) could not perform the indicated operation for the
traffic-engineering link with the indicated name and index, for the indicated reason.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_LMP_TE_LINK_INDEX
System Log Message No more TE-link indexes
Description No more traffic-engineering link indexes were available for allocation.
Copyright © 2010, Juniper Networks, Inc.528
Junos 10.3 System Log Messages Reference