Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

RPD_MC_CFG_CREATE_ENTRY_FAILED
System Log Message Could not create entry for entry.
Description The multicast configuration request failed because the routing protocol process (rpd)
failed to create the specified configuration entry.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
RPD_MC_CFG_FWDCACHE_CONFLICT
System Log Message Multicast forwarding-cache: reuse value must be less than or equal to suppress value
Description Multicast forwarding-cache reuse value is configured greater than the suppress value.
Reuse value must be less than or equal to the suppress value.
Type Event: This message reports an event, not an error
Severity warning
Facility ANY
RPD_MC_CFG_PREFIX_LEN_SHORT
System Log Message Multicast argument: prefix length prefix-length is too short for prefix route-prefix, ignoring
excess host bits
Description The prefix length for the indicated prefix is too short and it has a non-zero host portion.
Excess host bits will be ignored.
Type Event: This message reports an event, not an error
Severity warning
Facility ANY
RPD_MC_COSD_WRITE_ERROR
System Log Message Unable to write to pipe to COS process: (error-message)
Description The routing protocol process (rpd) could not write a message on the write pipe to the
Class Of Service process (cosd).
Type Error: An error occurred
Severity info
Facility LOG_DAEMON
Action Contact your technical support representative.
Copyright © 2010, Juniper Networks, Inc.530
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English