Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Facility LOG_DAEMON
RPD_MLD_MEMBERSHIP_TIMEOUT
System Log Message Membership timeout for listener source-address for group group-address source
sender-address on interface interface-name at time
Description MLD group membership timeout.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
RPD_MLD_ROUTER_VERSION_MISMATCH
System Log Message MLD version mismatch on interface-name. Local version: local-version Remote version:
remote-version
Description The MLD version running on the local router does not match the one received in the query
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
RPD_MPLS_INTERFACE_ROUTE_ERROR
System Log Message Unable to add route in table table-name for label mpls-label pointing to interface-name
Description There was a failure in adding a Multiprotocol Label Switching (MPLS) route pointing to
an interface
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
RPD_MPLS_INTF_MAX_LABELS_ERROR
System Log Message Maximum labels exceeded - failed to stack additional label to nexthop on interface
interface-name
Description There was a failure in stacking additional label to a nexthop which already has maximum
number of labels allowed for the interface
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_MPLS_LSP_AUTOBW_NOTICE
System Log Message mpls LSP lsp-name Autobw already in progress, ignoring new trigger
537Copyright © 2010, Juniper Networks, Inc.
Chapter 73: RPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English