Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Reissue the command without the duplicate option.
RPD_PARSE_CMD_EXTRA
System Log Message executable-name: command-line option option is extraneous
Description The command line used to start the indicated process included the indicated option,
which is extraneous. The process did not start.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Reissue the command and omit the extraneous option.
RPD_PIM_NBRDOWN
System Log Message Instance routing-instance: PIM neighbor neighbor-address (interface-name) removed due
to: reason
Description The routing protocol process (rpd) declared the indicated PIM neighbor inactive.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_DAEMON
RPD_PIM_NBRUP
System Log Message Instance routing-instance: PIM new neighbor neighbor-address interface interface-name
Description The routing protocol process (rpd) discovered the indicated new PIM neighbor on the
indicated interface.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
RPD_PLCY_CFG_COMMUNITY_FAIL
System Log Message Failed to parse community string under policy-options: error-message
Description The routing protocol process (rpd) encountered a non-catastrophic error in bgp
community member string while parsing policy-options.
Type Event: This message reports an event, not an error
Copyright © 2010, Juniper Networks, Inc.548
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English