Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Cause Either rpd is leaking memory or the use of system resources is excessive, perhaps because
routing filters are misconfigured or the configured network topology is very complex.
Action Increase the amount of RAM in the Routing Engine.
RPD_PARSE_BAD_LR_NAME
System Log Message executable-name: logical system name "logical-system-name"exceeds count characters
Description The indicated logical system name exceeds the indicated maximum number of characters.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Assign a shorter name.
RPD_PARSE_BAD_OPTION
System Log Message executable-name: command-line option option is invalid
Description The command line used to start the indicated process included the indicated option,
which is invalid. The process did not start.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Reissue the command without the invalid option.
RPD_PARSE_CMD_ARG
System Log Message executable-name: missing required argument for command-line option option
Description The command line used to start the indicated process did not include the argument
required by the indicated option. The process did not start.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Reissue the command and include the required argument.
RPD_PARSE_CMD_DUPLICATE
System Log Message executable-name: command-line option option is a duplicate
Description The command line used to start the indicated process included the indicated duplicate
option. The process did not start.
547Copyright © 2010, Juniper Networks, Inc.
Chapter 73: RPD System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English