Cause The communication path to the neighboring router was disrupted, a protocol error
occurred, or the neighboring router was powered down.
RPD_RSVP_NBRUP
System Log Message RSVP neighbor neighbor-address up on interface interface-name
Description An RSVP neighbor was established to the indicated address.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
RPD_RT_CFG_BR_CONFLICT
System Log Message static route: route-prefix is also configured as backup-router destination, turn on retain
flag to ensure proper functionality
Description A conflict occurred between the system backup router configuration and the indicated
static route.
Type Event: This message reports an event, not an error
Severity warning
Facility ANY
Action Add the retain flag to the static route
RPD_RT_CFG_CREATE_ENTRY_FAILED
System Log Message Could not create entry entry
Description RT failed to create the indicated configuration entry. The configuration request failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Action Contact your technical support representative.
RPD_RT_CFG_INVALID_VALUE
System Log Message The object-name configuration object identifier field has an invalid value of value
Description The configuration request failed because the indicated configuration object contained
the indicated invalid value.
Type Error: An error occurred
Severity error
557Copyright © 2010, Juniper Networks, Inc.
Chapter 73: RPD System Log Messages
To Next Page
Loading...