Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Severity warning
Facility LOG_DAEMON
RPD_RSVP_COS_CFG_WARN
System Log Message RSVP: Error while checking the existence of [edit class-of-service]: error-message
Description RSVP detected an error while parsing configurations under the CoS hierarchy. RSVP CoS
configurations will be ignored.
Type Event: This message reports an event, not an error
Severity warning
Facility ANY
RPD_RSVP_LSP_SWITCH
System Log Message RSVP LSP lsp-name switched to backup; using bypass LSP bypass-lsp-name, route
lsp-rro
Description RSVP detected a failure downstream for the indicated label-switched path (LSP) and
switched it to a backup using the indicated bypass LSP.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
Cause The downstream interface or router for the LSP went down.
RPD_RSVP_MAXIMUM_SESSIONS
System Log Message RSVP maximum session limit of limit reached
Description The routing protocol process (rpd) could not set up an RSVP session because the
indicated limit on the number of sessions was reached.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
RPD_RSVP_NBRDOWN
System Log Message RSVP neighbor neighbor-address down on interface interface-name, reason
Description The RSVP neighbor to the indicated address was terminated.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
Copyright © 2010, Juniper Networks, Inc.556
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English