Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Description The number of paths in the indicated routing table previously equaled or exceeded the
indicated limit, but went down to the indicated number, which is below the limit.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
RPD_RT_PATH_LIMIT_REACHED
System Log Message Number of paths (count) in table table-name status configured maximum (limit)
Description The indicated total number of paths in the indicated routing table equaled or exceeded
the indicated configured limit. Attempts to add some types of path to the table fail while
this condition holds, but the path count can exceed the limit if paths are forcibly added
(for example, for static routes). This message first appears in the log when the limit is
reached and repeats periodically until the number of paths goes below the limit.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_RT_PATH_LIMIT_WARNING
System Log Message Number of paths (count) in table table-name reached warning threshold (threshold
percent of configured maximum limit)
Description The indicated total number of paths in the indicated routing table reached the threshold
for a warning. The threshold is the indicated percentage of the indicated configured limit
on the number of paths.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
RPD_RT_PREFIX_LIMIT_BELOW
System Log Message Number of prefixes (prefix-count) in table table-name is now less than the configured
maximum (limit)
Description The number of prefixes in the indicated routing table previously equaled or exceeded the
indicated limit, but went down to the indicated number, which is below the limit.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_DAEMON
RPD_RT_PREFIX_LIMIT_REACHED
System Log Message Number of prefixes (prefix-count) in table table-name status configured maximum (limit)
Copyright © 2010, Juniper Networks, Inc.560
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English