Severity error
Facility LOG_DAEMON
RPD_TASK_DYN_REINIT
System Log Message Dynamic reconfiguration in process
Description The routing protocol process (rpd) reinitialized.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
RPD_TASK_FORK
System Log Message Unable to fork task-name: error-message
Description The routing protocol process failed to create the indicated child process.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
RPD_TASK_GETWD
System Log Message getwd: error-message
Description The getwd() system call made by the routing protocol process (rpd) failed.
Type Error: An error occurred
Severity error
Facility LOG_DAEMON
Cause It is possible that the kernel lacked the resources to fulfill the request. The rpd process
will recover.
RPD_TASK_MASTERSHIP
System Log Message Assuming mastership
Description The routing protocol process (rpd) became active when the Routing Engine on which it
was running assumed mastership.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_DAEMON
Copyright © 2010, Juniper Networks, Inc.566
Junos 10.3 System Log Messages Reference
To Next Page
Loading...