Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Type Error: An error occurred
Severity error
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
UI_CFG_AUDIT_NEW
System Log Message User 'username' action: pathname new-name
Description The indicated user created a new configuration object by copying or renaming an existing
object as indicated.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
UI_CFG_AUDIT_OTHER
System Log Message User 'username' action: pathname delimitervalue
Description The indicated user deleted, activated, or deactivated a configuration object, as indicated.
The JUNOS configuration log facility logged the change.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
UI_CFG_AUDIT_SET
System Log Message User 'username' action: pathname delimiterdata -> "value"
Description The indicated user set a value for a configuration object, as indicated.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
UI_CFG_AUDIT_SET_SECRET
System Log Message User 'username' action: pathname
Description The indicated user set a value for a configuration object, as indicated. For security, the
actual value (which might be an authentication key or password, for example) is not
recorded.
Type Event: This message reports an event, not an error
Copyright © 2010, Juniper Networks, Inc.634
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English