Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Severity info
Facility ANY
UI_CHILD_ARGS_EXCEEDED
System Log Message Too many arguments for child process 'command'
Description The management process (mgd) invokes some commands on behalf of users. It supplied
more arguments than the command's syntax statement specifies.
Type Error: An error occurred
Severity error
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
UI_CHILD_CHANGE_USER
System Log Message Unable to switch to local user: username
Description The management process (mgd) invokes some commands on behalf of users. Its attempt
to adopt the UID of the indicated user failed.
Type Error: An error occurred
Severity error
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
UI_CHILD_EXEC
System Log Message Child exec failed for command 'command': error-message
Description The management process (mgd) invoked the exec() system call while creating a child
processes to execute the indicated command on its behalf. The system call failed.
Type Error: An error occurred
Severity error
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
635Copyright © 2010, Juniper Networks, Inc.
Chapter 88: UI System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English