Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

UI_CHILD_EXITED
System Log Message Child exited: PID pid, status return-valuecore-dump-status, command 'command'
Description The management process (mgd) created a child process to execute the indicated
command for it. The child process exited unexpectedly with the indicated status code.
Type Error: An error occurred
Severity notice
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
UI_CHILD_FOPEN
System Log Message Unable to append to log 'filename': error-message
Description The management process (mgd) attempted to save the output from a command in the
indicated log file, but could not open the file.
Type Error: An error occurred
Severity error
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
UI_CHILD_PIPE_FAILED
System Log Message Unable to create pipe for command 'command': error-message
Description The management process (mgd) created a child process to execute the indicated
command for it. Its attempt to create pipes for communication with the child process
failed.
Type Error: An error occurred
Severity error
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
Copyright © 2010, Juniper Networks, Inc.636
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English