Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Cause The database file does not exist.
Action Select a different filename or create a new configuration.
Cause The /config directory does not have sufficient space for a new database.
Action Remove files from the /config directory to make more space available.
UI_DBASE_REBUILD_FAILED
System Log Message modeusername rebuild of the database 'filename' failed
Description The management process (mgd) could not rebuild the configuration database file.
Type Error: An error occurred
Severity alert
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
UI_DBASE_REBUILD_SCHEMA_FAILED
System Log Message Automatic rebuild of the database failed
Description The management process (mgd) could not rebuild the schema for the configuration
database.
Type Error: An error occurred
Severity alert
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
UI_DBASE_REBUILD_STARTED
System Log Message modeusername rebuild/rollback of the database 'filename' started
Description The management process (mgd) began to rebuild the configuration database file or its
schema because that object was not current. The operation will complete shortly.
Type Event: This message reports an event, not an error
Severity alert
Facility ANY
647Copyright © 2010, Juniper Networks, Inc.
Chapter 88: UI System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English