Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Type Event: This message reports an event, not an error
Severity notice
Facility LOG_AUTH
UI_INITIALSETUP_OPERATION
System Log Message Committing EZsetup configuration as EZsetup option is chosen
Description The management process (mgd) began a commit operation to activate the pre initial
setup configuration, because the initial-setup option was selected from the LCD Menu.
Type Event: This message reports an event, not an error
Severity notice
Facility LOG_AUTH
UI_INVALID_REMOTE_PERMISSION
System Log Message invalid permissions from authorization server: permission-name
Description RADIUS and TACACS+ authorization servers use Juniper Networks vendor-specific
attributes (VSAs) to specify user permissions. A VSA included the indicated permission
name, which is invalid.
Type Error: An error occurred
Severity error
Facility ANY
UI_JUNOSCRIPT_CMD
System Log Message User 'username' used JUNOScript client to run command 'command'
Description The indicated user ran the indicated command using the JUNOS XML management
protocol.
Type Event: This message reports an event, not an error
Severity info
Facility LOG_AUTH
UI_JUNOSCRIPT_ERROR
System Log Message JUNOScript error: error-message
Description The management process (mgd) normally sends an error message to the JUNOS CLI or
JUNOScript API client in an <xnm:error> tag. It could not send the tag, so it sent the
indicated error message in an XML comment instead.
Type Error: An error occurred
Severity warning
649Copyright © 2010, Juniper Networks, Inc.
Chapter 88: UI System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English