Facility ANY
UI_LCC_NO_MASTER
System Log Message No master Routing Engine defined for LCClcc
Description By default, the Junos OS installed on the TX Matrix platform in a routing matrix is
automatically copied to and installed on all T640 routing nodes in the routing matrix.
The software was not installed on the indicated T640 routing node (line-card chassis,
or LCC), because the management process (mgd) on the TX Matrix platform could not
determine which Routing Engine on the LCC was the master.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
Action Resolve the mastership situation on the T640 routing node and install the software on
its Routing Engines.
UI_LOAD_EVENT
System Log Message User 'username' is performing a 'operation'
Description The indicated user requested the indicated operation ('rollback, ' or 'load' or one of its
variants) on the configuration database. The existing configuration database was deleted
and a new database was created based on a text file.
Type Event: This message reports an event, not an error
Severity notice
Facility ANY
UI_LOAD_JUNOS_DEFAULT_FILE_EVENT
System Log Message Loading the default config from pathname
Description The system is loading junos default configuration from file.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
UI_LOGIN_EVENT
System Log Message User 'username' login, class 'class-name' local-peer[pid], ssh-connection 'ssh-connection',
client-mode 'client-mode'
Description The indicated user started a JUNOS CLI session.
Type Event: This message reports an event, not an error
Severity info
Copyright © 2010, Juniper Networks, Inc.650
Junos 10.3 System Log Messages Reference
To Next Page
Loading...