Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Facility ANY
UI_LOGOUT_EVENT
System Log Message User 'username' logout
Description The indicated user exited from a JUNOS CLI session.
Type Event: This message reports an event, not an error
Severity info
Facility ANY
UI_LOST_CONN
System Log Message Lost connection to daemon 'process-name'
Description The management process (mgd) uses sockets to communicate with other JUNOS
software processes. The socket it was using for the indicated process closed prematurely.
Type Error: An error occurred
Severity error
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
UI_MASTERSHIP_EVENT
System Log Message mastership-event card-name mastership by 'username'
Description Some redundant routing platform components use a master/standby system in which
the master component is active and the standby is inactive but ready to assume
mastership. The indicated user performed the indicated operation to modify component
mastership.
Type Event: This message reports an event, not an error
Severity warning
Facility LOG_AUTH
UI_MOTD_PROPAGATE_ERROR
System Log Message Unable to propagate login announcement (motd) to pathname
Description The management process (mgd) could not create or write to the indicated file, which
was the intended location for the message of the day (MOTD) configured at the [edit
system login announcement] hierarchy level.
Type Error: An error occurred
651Copyright © 2010, Juniper Networks, Inc.
Chapter 88: UI System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English