Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Severity error
Facility ANY
UI_NETCONF_CMD
System Log Message User 'username' used NETCONF client to run command 'command'
Description The indicated user ran the indicated command using the NETCONF application
programming interface (API).
Type Event: This message reports an event, not an error
Severity info
Facility LOG_AUTH
UI_NETCONF_ERROR
System Log Message NETCONF error: error-message
Description The management process (mgd) normally sends error messages to the NETCONF client
in the <rpc-error> tag element. It could not send that tag element, and instead sent the
indicated error message in an XML comment.
Type Error: An error occurred
Severity warning
Facility ANY
UI_PARSE_JUNOSCRIPT_ATTRIBUTES
System Log Message Error parsing attributes in client junoscript tag
Description The management process (mgd) encountered an error and exited while attempting to
parse the XML attributes in the <junoscript> tag submitted by a client application.
Type Error: An error occurred
Severity error
Facility LOG_AUTH
UI_READ_FAILED
System Log Message read failed for peer peer-name: error-message
Description The management process (mgd) uses the read() system call to access data sent by
other JUNOS processes running on the routing platform (referred to as its peers). The
system call failed for the indicated process.
Type Error: An error occurred
Severity error
Facility ANY
Copyright © 2010, Juniper Networks, Inc.652
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English