Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

the database understands the data. The value in the database file did not match the
expected value.
Type Error: An error occurred
Severity error
Facility ANY
Cause The JUNOS software installation did not succeed, possibly because of an internal software
error.
Action Contact your technical support representative.
UI_SCHEMA_SEQUENCE_ERROR
System Log Message Schema sequence number mismatch
Description The JUNOS user interface schema file records all CLI commands and configuration
statements available in the JUNOS software. The management process (mgd) rebuilds
the schema as necessary to be compatible with the JUNOS software installed on the
routing platform. A sequence number in the schema acts as a checksum that represents
its content and format. A JUNOS process attempted to access the schema but determined
that the schema's sequence number means that it is incompatible with the process.
Type Error: An error occurred
Severity alert
Facility ANY
Cause An internal software failure occurred.
Action Contact your technical support representative.
UI_TACPLUS_ERROR
System Log Message TACACS+ failure: error-message
Description The management process (mgd) failed to send a record to TACACS+.
Type Error: An error occurred
Severity notice
Facility LOG_AUTH
UI_VERSION_FAILED
System Log Message Unable to fetch system version: error-message
Description The management process (mgd) could not retrieve version information from the kernel.
Type Error: An error occurred
655Copyright © 2010, Juniper Networks, Inc.
Chapter 88: UI System Log Messages

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English