“Interpreting Messages Generated in Standard Format by a JUNOS Process or Library”
on page 41, and “Displaying and Interpreting System Log Message Descriptions” on
page 47.)
Table 9 on page 19 lists the facility codes that can appear in system log messages and
maps them to facility names.
NOTE: If the second column in Table 9 on page 19 does not include the Junos facility
name for a code, the facility cannot be included in a statement at the [edit system
syslog] hierarchy level. The Junos OS might use the facilities in Table 9 on page 19—
and others that are not listed—when reporting on internal operations
Table 9: Facility Codes Reported in Priority Information
Type of Event or ErrorJunos Facility NameCode
Authentication and
authorization attempts
authorizationAUTH
Authentication and
authorization attempts that
can be viewed by superusers
only
AUTHPRIV
Changes to the Junos
configuration
change-logCHANGE
Specified configuration is
invalid on the routing platform
type
conflict-logCONFLICT
Messages written to
/dev/console by the kernel
console output driver
CONSOLE
Actions performed or errors
encountered by the cron
process
CRON
Actions performed or errors
encountered by system
processes
daemonDAEMON
Actions performed or errors
encountered by the dynamic
flow capture process
dfcDFC
Packet filtering actions
performed by a firewall filter
firewallFIREWALL
Actions performed or errors
encountered by the FTP
process
ftpFTP
19Copyright © 2010, Juniper Networks, Inc.
Chapter 1: Configuring System Log Messages
To Next Page
Loading...
Need help?
General
