Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 User Manual

Table 9: Facility Codes Reported in Priority Information (continued)
Type of Event or ErrorJunos Facility NameCode
Commands issued at the
Junos OS CLI prompt or
invoked by a client application
such as a Junos XML protocol
or NETCONF client
interactive-commandsINTERACT
Actions performed or errors
encountered by the Junos
kernel
kernelKERN
Actions performed or errors
encountered by the Network
Time Protocol (NTP) process
NTP
Actions performed or errors
encountered by the Packet
Forwarding Engine
pfePFE
Actions performed or errors
encountered by the Junos
system logging utility
SYSLOG
Actions performed or errors
encountered by user-space
processes
userUSER
Table 10 on page 20 lists the numerical severity codes that can appear in system log
messages and maps them to severity levels.
Table 10: Numerical Codes for Severity Levels Reported in Priority
Information
DescriptionSeverity LevelNumerical Code
System panic or other
condition that causes the
routing platform to stop
functioning
emergency0
Conditions that require
immediate correction, such as
a corrupted system database
alert1
Critical conditions, such as
hard drive errors
critical2
Error conditions that generally
have less serious
consequences than errors in
the emergency, alert, and
critical levels
error3
Copyright © 2010, Juniper Networks, Inc.20
Junos 10.3 System Log Messages Reference

Juniper JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010 Specifications

General

Brand	Juniper
Model	JUNOS OS 10.3 - SYSTEM LOG MESSAGES REFERENCE 7-12-2010
Category	Software
Language	English