•
Rubber safety cap for fiber-optic interfaces or cable
•
Wire cutters
Packing the Junos Pulse Gateway for Shipment
To pack the Junos Pulse Gateway for shipment:
1. Retrieve the shipping crate and packing materials in which the Junos Pulse Gateway
was originally shipped. If you do not have these materials, contact your Juniper
Networks representative about approved packaging materials.
2. Shut down the Junos Pulse Gateway software.
3. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
the strap to one of the ESD points on the chassis.
4. Shut down power to the Junos Pulse Gateway.
5. Disconnect power from the Junos Pulse Gateway.
6. Remove the cables that connect to all external devices.
7. Remove all field replaceable units (FRUs) from the Junos Pulse Gateway.
8. Remove the Junos Pulse Gateway chassis from the rack, using one of the following
methods:
•
If you are using a mechanical lift, place the lift platform under the chassis, unscrew
and remove the mounting screws from the rack, and move the chassis to the shipping
crate.
•
If you are not using a mechanical lift and the chassis weight is fully supported by a
shelf or another device, unscrew and remove the mounting screws from the rack.
Three people can then lift the chassis and move it to the shipping crate.
•
If you are not using a mechanical lift and the chassis weight is not fully supported
by a shelf or another device, three people should grasp the chassis while a fourth
person unscrews and removes the mounting screws from the rack. The three lifters
can then move the chassis to the shipping crate.
9. Place the Junos Pulse Gateway in the shipping crate or onto the pallet. If on a pallet,
bolt the services gateway to the pallet.
10. Cover the Junos Pulse Gateway with an ESD bag and place the packing foam on top
of and around the Junos Pulse Gateway.
11. Replace the accessory box on top of the packing foam.
12. Securely tape the box closed or place the crate cover over the Junos Pulse Gateway.
13. Write the RMA number on the exterior of the box to ensure proper tracking.
Copyright © 2014, Juniper Networks, Inc.108
Junos
®
Pulse Gateway Hardware Guide
To Next Page
Loading...
Need help?
General
