Juniper Junos Pulse MAG2600 User Manual

Choice:
If you do not see this message, make sure the management console is connected, and
then cycle the power on the Junos Pulse Gateway.
Connecting the Junos Pulse Gateway to the Network
The MAG Series Junos Pulse Gateway has the port assignments described in
Table 25 on page 78.
Table 25: Port Assignment
DescriptionPortModel
Internal0MAG2600
External1
Reserved for management network0MAG4610
Internal1
External2
Reserved for management network0MAG-SM160
Internal1
External2
Reserved for management network0MAG-SM360
Internal1
External2
Beacon Endpoint Profiler management and traffic profiling0MAG-SM360-PROFILER
High availability1
Not used2
If you are using Enterprise Guest Access, connect Port 1 (external port) to the guest
network.
Connecting the MAG-CM060 CMC to a Network
The MAG-CM060 has two Ethernet ports:
•
0 (em0)
•
1 (em1) - reserved
Copyright © 2014, Juniper Networks, Inc.78
Junos
®
Pulse Gateway Hardware Guide

Juniper Junos Pulse MAG2600 Specifications

General

Brand	Juniper
Model	Junos Pulse MAG2600
Category	Gateway
Language	English