Juniper Junos Pulse MAG2600 User Manual

APPENDIX A
Junos Pulse Gateway Power Guidelines,
Requirements, and Specifications
•
Junos Pulse Gateway Electrical Safety Guidelines and Warnings on page 113
Junos Pulse Gateway Electrical Safety Guidelines and Warnings
In Case of Electrical Accident
If an electrical accident results in an injury, take the following actions in this order:
1. Use caution. Be aware of potentially hazardous conditions that could cause further
injury.
2. Disconnect power from the Junos Pulse Gateway.
3. If possible, send another person to get medical aid. Otherwise, assess the condition
of the victim, and then call for help.
General Electrical Safety Guidelines and Warnings
•
Install the Junos Pulse Gateway in compliance with the following local, national, or
international electrical codes:
•
United States—National Fire Protection Association (NFPA 70), United States
National Electrical Code
•
Canada—Canadian Electrical Code, Part 1, CSA C22.1
•
Other countries—International Electromechanical Commission (IEC) 60364, Part 1
through Part 7
•
Evaluated to the TN power system
•
Locate the emergency power-off switch for the room in which you are working so that
if an electrical accident occurs, you can quickly turn off the power.
•
Do not work alone if potentially hazardous conditions exist anywhere in your workspace.
•
Never assume that power is disconnected from a circuit. Always check the circuit before
starting to work.
113Copyright © 2014, Juniper Networks, Inc.

Juniper Junos Pulse MAG2600 Specifications

General

Brand	Juniper
Model	Junos Pulse MAG2600
Category	Gateway
Language	English