EasyManua.ls Logo

Juniper MX240 - MX240 Application Services Modular Processing Card Description; MX240 as MSC Leds; Figure 31: Application Services Modular Processing Card (as MXC); Table 52: as MSC Leds

Juniper MX240
512 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MX240 Application Services Modular Processing Card Description
The Application Services Modular Processing Card (AS MXC) is a pluggable X86-based
card that can be inserted into the lower slot of the Application Services Modular Line
Card (AS MLC). The AS MXC serves as the processing card for the Junos Content Encore
system and contains the two X86, Intel 8-core processors with interface ability greater
than 80 Gbps. The AS MXC (see Figure 31 on page 87) is equivalent to a PIC or MIC
(Modular Interface Card).
AS MXCs are hot-removable and hot-insertable. One MXC can be installed in the lower
slot of each AS MLC. Each MXC has these components:
Two 8-core Intel processors—Contains eight execution cores with Ring Interconnect
architecture. Each core supports two threads, up to 16 threads per socket.
64 GB DRAM—On DIMM sockets.
LEDs—Two LEDs on the faceplate display the CPU and application status.
Figure 31: Application Services Modular Processing Card (AS MXC)
g006672
Related
Documentation
MX240 AS MXC LEDs on page 88
Replacing an MX240 AS MXC on page 331
MX240 AS MSC LEDs
Two LEDs (CPU and AP) indicate the status of the AS MSC and are located on the AS
MSC. Table 52 on page 87 describes the functions of the AS MSC LEDs.
Table 52: AS MSC LEDs
DescriptionStateColorLabel
AS MSC operates normally.On steadilyGreenCPU
AS MSC has an error or has failed.On steadilyRed
AS MSC is offline.Off
87Copyright © 2017, Juniper Networks, Inc.
Chapter 6: Line Card Components and Descriptions

Table of Contents

Other manuals for Juniper MX240

Related product manuals