Table 59: SCBE2 LEDs
DescriptionStateColorLabel
Fabric is in active mode.On steadilyGreenFABRIC
ACTIVE
SCBE2 operates in fabric-only mode.On steadilyGreenFABRIC
ONLY
SCBE2 operates in fabric or control-board mode.Off–
SCBE2 is online.On steadilyGreenOK/FAIL
SCBE2 has failed.On steadilyRed
SCBE2 is offline.Off–
Building-integrated timing supply (BITS) clocking
interface is active.
On steadilyGreenBITS
BITS clocking interface has failed.On steadilyRed
BITS clocking interface is offline.Off–
Global positioning system (GPS) clocking interface
is active.
On steadilyGreenGPS
GPS clocking interface has failed.On steadilyRed
GPS clocking interface is offline.Off–
Universal Timing Interface (UTI) clocking interface
is active.
On steadilyGreenUTI
UTI clocking interface has failed.On steadilyRed
UTI clocking interface is offline.Off–
Port is enabled and link is established.On steadilyGreenLINK
Port is disabled or no link is established.Off–
Related
Documentation
• MX240 SCBE2 Description on page 102
105Copyright © 2017, Juniper Networks, Inc.
Chapter 8: Switch Fabric Components and Descriptions
To Next Page
Loading...
