Juniper MX240 - MX240 Routing Engine Leds; RE-S-1800 Routing Engine Leds; Table 13: Routing Engine Leds; Table 14: Routing Engine Leds

MX240 Routing Engine LEDs
Each Routing Engine has four LEDs that indicate its status. The LEDs, labeled MASTER,
HDD, ONLINE, and FAIL, are located directly on the faceplate of the Routing Engine.
Table 13 on page 31 describes the functions of the Routing Engine LEDs.
Table 13: Routing Engine LEDs
DescriptionStateColorLabel
Routing Engine is the master.On steadilyBlueMASTER
Indicates activity on the hard disk drive.BlinkingGreenHDD
Routing Engine is transitioning online.BlinkingGreenONLINE
Routing Engine is functioning normally.On steadily
Routing Engine has failed.On steadilyRedFAIL
Related
Documentation
MX240 Routing Engine Description on page 23•
• Replacing an MX240 Routing Engine on page 275
RE-S-1800 Routing Engine LEDs
Each Routing Engine has four LEDs that indicate its status. The LEDs, labeled MASTER,
STORAGE, ONLINE, and OK/FAIL, are located directly on the faceplate of the Routing
Engine. Table 14 on page 31 describes the functions of the Routing Engine LEDs.
Table 14: Routing Engine LEDs
DescriptionStateColorLabel
Routing Engine is the Master.On steadilyBlueMASTER
Indicates activity on the SSD or Compact Flash.BlinkingGreenSTORAGE
Routing Engine is transitioning online.BlinkingGreenONLINE
Routing Engine is functioning normally.On steadily
Routing Engine has failed.On steadilyRedOK/FAIL
Related
Documentation
MX240 Routing Engine Description on page 23•
• MX480 Routing Engine Description
• MX960 Routing Engine Description
31Copyright © 2017, Juniper Networks, Inc.
Chapter 5: Host Subsystem Components and Descriptions