Table 58: MX SCBE LEDs (continued)
DescriptionStateColorLabel
MX SCBE is online.On steadilyGreenOK/FAIL
MX SCBE has failed.On steadilyRed
MX SCBE is offline.Off–
GPS clocking interface has failed.On steadilyRed
GPS clocking interface is offline.Off–
NOTE: The LEDs BITS, GPS, and UTI are not currently supported.
Building-integrated timing supply (BITS) clocking
interface is active.
On steadilyGreenBITS
BITS clocking interface has failed.On steadilyRed
BITS clocking interface is offline.Off–
Global positioning system (GPS) clocking interface
is active.
On steadilyGreenGPS
GPS clocking interface has failed.On steadilyRed
GPS clocking interface is offline.Off–
Universal Timing Interface (UTI) clocking interface
is active.
On steadilyGreenUTI
UTI clocking interface has failed.On steadilyRed
UTI clocking interface is offline.Off–
Related
Documentation
MX240 SCBE Description on page 99•
• MX240 Host Subsystem Description on page 21
• Upgrading an MX240 SCB on page 347
MX240 SCBE2 Description
The Switch Control Board SCBE2 serves the carrier Ethernet services router and carrier
Ethernet transport markets that require higher-capacity traffic support, demanding
greater interface density (slot and capacity scale) as well as improved services. The
upgraded SCB is supported on MX960, MX480, and MX240 routers. Some key attributes
of the SCBE2 are:
Copyright © 2017, Juniper Networks, Inc.102
MX240 3D Universal Edge Router Hardware Guide
To Next Page
Loading...
