Juniper MX240 - Chapter 29 Maintaining Components; Maintaining Components; Tools and Parts Required to Maintain the MX240 Router

CHAPTER 29
Maintaining Components
•
Tools and Parts Required to Maintain the MX240 Router on page 377
•
Maintaining the MX240 Air Filter on page 378
•
Maintaining the MX240 Fan Tray on page 378
•
Maintaining the MX240 Host Subsystem on page 380
•
Maintaining MX240 DPCs on page 382
•
Holding an MX240 DPC on page 384
•
Storing an MX240 DPC on page 386
•
Maintaining MX240 FPCs on page 387
•
Holding an MX240 FPC on page 388
•
Storing an MX240 FPC on page 392
•
Maintaining MX240 MICs on page 393
•
Maintaining MX240 MPCs on page 393
•
Maintaining MX240 PICs on page 395
•
Maintaining Cables that Connect to MX240 DPCs, MPCs, MICs, or PICs on page 395
•
Maintaining the MX240 Power Supplies on page 396
Tools and Parts Required to Maintain the MX240 Router
To maintain hardware components, you need the following tools and parts:
•
ESD grounding wrist strap
•
Flat-blade (–) screwdriver
•
Phillips (+) screwdriver, number 1
•
Phillips (+) screwdriver, number 2
Related
Documentation
Routine Maintenance Procedures for the MX240 Router on page 375•
• Maintaining the MX240 Host Subsystem on page 380
377Copyright © 2017, Juniper Networks, Inc.