CAUTION: The weight of the FPC is concentrated in the back end. Be
prepared to accept the full weight—up to 18 lb (8.2 kg)—as you slide the
FPC out of the chassis.
When the FPC is out of the chassis, do not hold it by the ejector handles,
bus bars, or edge connectors. They cannot support its weight.
Figure 66: Removing an FPC
Related
Documentation
Tools and Parts Required to Replace MX240 Hardware Components on page 226•
• Installing the MX240 Chassis in the Rack Manually on page 189
• Reinstalling Components in the MX240 Router After Installing it without a Lift on
page 190
• Preventing Electrostatic Discharge Damage to an MX240 Router on page 444
Copyright © 2017, Juniper Networks, Inc.188
MX240 3D Universal Edge Router Hardware Guide
To Next Page
Loading...
