Juniper MX240 - Compliance Statements for Acoustic Noise for the MX240 Router; Compliance Statements for NEBS

Compliance Statements for NEBS
•
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
•
The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.
•
The battery return connection is to be treated as an isolated DC return (i.e. DC-I), as
defined in GR-1089-CORE.
•
For Juniper Networks systems with AC power supplies, an external surge protective
device (SPD) must be used at the AC power source.
Compliance Statements for Acoustic Noise for the MX240 Router
The router complies with NEBS Level 3 requirements:
•
GR-63-CORE: NEBS, Physical Protection
•
GR-1089-CORE:EMC and Electrical Safety for NetworkTelecommunications Equipment
Related
Documentation
• Agency Approvals for MX Series Routers on page 479
• MX240 Compliance Statements for NEBS
• Compliance Statements for EMC Requirements for the MX240 Router
• Compliance Statements for Environmental Requirements for Juniper Networks Devices
on page 481
Copyright © 2017, Juniper Networks, Inc.482
MX240 3D Universal Edge Router Hardware Guide