CHAPTER 12
AC Power Requirements and
Specifications
•
AC Power Supply Electrical Specifications for the MX240 Router on page 127
•
Power Requirements for an MX240 Router on page 128
•
Calculating Power Requirements for MX240 Routers on page 137
•
AC Power Circuit Breaker Requirements for the MX240 Router on page 140
•
AC Power Cord Specifications for the MX240 Router on page 140
AC Power Supply Electrical Specifications for the MX240 Router
Table 68 on page 127 lists the AC power supply electrical specifications;
Table 69 on page 128 lists the AC power system specifications.
Table 68: AC Power Supply Electrical Specifications
SpecificationItem
Normal-Capacity Power Supplies
1027 W (low line)
1590 W (high line)
Maximum output power
Operating range: 100–240 VAC (nominal)AC input voltage
50 to 60 Hz (nominal)AC input line frequency
11.0 A @ 200 VAC or 14.5 A @ 110 VAC maximumAC input current rating
85% (low line and high line)Efficiency
NOTE: This value is at full
load and nominal voltage.
High-Capacity Power Supplies
1167 W (low line)
2050 W (high line)
Maximum output power
127Copyright © 2017, Juniper Networks, Inc.
To Next Page
Loading...
