Figure 100: Installing a PIC
Related
Documentation
MX240 PIC Description on page 59•
• Maintaining MX240 PICs on page 395
• Troubleshooting the MX240 PICs on page 410
• Replacing an MX240 FPC on page 302
• Removing an MX240 PIC on page 316
• Preventing Electrostatic Discharge Damage to an MX240 Router on page 444
• MX240 PIC Serial Number Label on page 427
Installing an MX240 AS MLC
You can install up to five Application Services Modular Line Cards (AS MLCs) horizontally
in the front of the MX240 router. The AS MLCs are hot-insertable and hot-removable.
An empty AS MLC weighs 10.5 lb (4.76 kg). A fully configured AS MLC can weigh up to
15.27 lb (6.93 kg). Be prepared to accept its full weight.
To install an AS MLC (see Figure 101 on page 251):
1. Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
ESD points on the chassis.
2. Place the AS MLC on an antistatic mat.
249Copyright © 2017, Juniper Networks, Inc.
Chapter 21: Installing Components
To Next Page
Loading...
