Juniper MX240 - Table 86: Accessory Box Parts List

Table 85: Parts List for a Fully Configured Routers (continued)
QuantityComponent
1Mounting shelf
One blank panel for each slot not
occupied by a component
Blank panels for slots without components installed
Table 86: Accessory Box Parts List
QuantityPart
22Screws to mount chassis and small shelf
5DC power terminal Lugs, 6-AWG
1RJ-45-to-DB-9 serial cable to connect the router through
the serial port
2Terminal block plug, 3–pole, 5.08 mm spacing, 12A, to
connect the router alarms
1Label, accessories contents, MX240
1USB flash drive with Junos OS
1Read me first document
1Affidavit for T1 connection
1Juniper Networks Product Warranty
1End User License Agreement
1Document sleeve
23 in. x 5 in. pink bag
29 in. x 12 in. pink bag, ESD
1Accessory box, 19 in. x 12 in. x 3 in.
1Ethernet cable, RJ-45/RJ-45, 4-pair stranded UTP,
Category 5E, 15'
1ESD wrist strap with cable
Related
Documentation
• Tools and Parts Required to Unpack the MX240 Router on page 163
• Unpacking the MX240 Router on page 163
Copyright © 2017, Juniper Networks, Inc.166
MX240 3D Universal Edge Router Hardware Guide