Juniper MX240 - Verifying the MX240 Router Parts Received; Table 85: Parts List for a Fully Configured Routers

Related
Documentation
Tools and Parts Required to Unpack the MX240 Router on page 163•
• Verifying the MX240 Router Parts Received on page 165
• Installing the MX240 Router By Using a Mechanical Lift on page 177
• Installing the MX240 Chassis in the Rack Manually on page 189
Verifying the MX240 Router Parts Received
A packing list is included in each shipment. Check the parts in the shipment against the
items on the packing list. The packing list specifies the part numbers and descriptions of
each part in your order.
If any part is missing, contact a customer service representative.
A fully configured router contains the router chassis with installed components, listed in
Table 85 on page 165, and an accessory box, which contains the parts listed in
Table 86 on page 166. The parts shipped with your router can vary depending on the
configuration you ordered.
Table 85: Parts List for a Fully Configured Routers
QuantityComponent
1Chassis, including midplane, craft interface, and
rack-mounting brackets
Up to 3DPCs
Up to 3MPCs
Up to 1FPC
1 or 2Routing Engines
1 or 2SCBs
1 or 2DC power supplies
1 or 2AC power supplies (220 V)
2 or 4AC power supplies (110 V)
1Fan tray
1Air filter
1Air filter tray
1Quick start installation instructions
165Copyright © 2017, Juniper Networks, Inc.
Chapter 14: Unpacking the MX240 Router