Juniper MX240 - Replacing an SSD Drive on an RE-S-X6-64 G; Figure 119: RE-S-X6-64 G Storage Drive Slots

Replacing an SSD Drive on an RE-S-X6-64G
Each RE-S-X6-64G Routing Engine supports two solid-state drives (SSD) specified by
Juniper Networks. The RE-S-X6-64G ships with two SSDs installed in the slot labeled
DISK1 and DISK2. Figure 119 on page 280 shows the arrangement of storage drive slots on
a RE-S-X6-64G Routing Engine.
Replacing an SSD drive in a RE-S-X6-64G Routing Engine consists of the following two
stages:
1. Replacing the SSD Drive in the Routing Engine.
2. Copying vmhost and Junos OS to the replaced SSD.
Figure 119: RE-S-X6-64G Storage Drive Slots
Copyright © 2017, Juniper Networks, Inc.280
MX240 3D Universal Edge Router Hardware Guide