Table 5: MX240 Router Hardware Components and CLI Terminology (continued)
DescriptionCLI NameHardware Model NumberComponent
“MX240 DC Power Supply
Description” on page 92
DC Power Entry ModulePWR-MX480-DCDC power supply
DC Power Entry ModulePWR-MX480-1600-DC
DC 2.4kW Power Entry
Module
PWR-MX480-2400-DC
“MX240 Power System
Description” on page 89
N/APWR-BLANK-MX960Power supply blank
panel
Related
Documentation
MX240 Router Overview on page 3•
• MX240 DPC Port and Interface Numbering on page 51
• MX240 MIC Port and Interface Numbering on page 75
• MX240 PIC Port and Interface Numbering on page 60
• MX Series Router Interface Names
MX240 Craft Interface Overview
The craft interface allows you to view status and troubleshooting information at a glance
and to perform many system control functions. It is hot-insertable and hot-removable.
The craft interface is located on the front of the router above the card cage and contains
LEDs for the router components, the alarm relay contacts, and alarm cutoff button. See
Figure 6 on page 12.
Figure 6: Front Panel of the Craft Interface
NOTE: At least one SCB must be installed in the router for the craft interface
to obtain power.
Related
Documentation
MX240 Alarm LEDs and Alarm Cutoff/Lamp Test Button on page 13•
• MX240 Alarm Relay Contacts on the Craft Interface on page 13
Copyright © 2017, Juniper Networks, Inc.12
MX240 3D Universal Edge Router Hardware Guide
To Next Page
Loading...
